Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION AND CONNECTION
Changing the side on which the door opens
When changing the side on which the door opens, the appliance must be disconnected
from the mains power.
Tools
1. Remove the two screws on the back of the top cover.
2. Lift the top cover and place it on a padded surface to prevent scratching.
3. Remove the four screws.
4. Lift the upper hinge core, then put it in a safe place.
5. Lift the door and place it on a padded surface to prevent scratching.
6. Remove both adjustable feet and remove the bottom hinge bracket by unscrewing the bolts.
Then transfer them to another side.
Note: you need to install (if required) the rubber supporting A on the door on the side which
does not have a hinge.
Note: you need to move the hinge axis from hole B to hole C before you transfer the hinge
bracket to another side.
7. Set the door into its new place making sure the pin enters the bushing at the lower frame
section.
EN 14
8 mm
10 mm
A
B
C
Publicité
