Conceptronic C300BRS4 Guide D'installation Rapide page 42

ENGLISH
Note: All security options of the Setup Wizard are explained, but it is advised to secure your network
with "WPA-PSK/WPA2-PSK" security if your Clients do not support WPS. This is the highest WPA2
security level, with backwards compatibility to WPA only clients.
Note: Remember or write down the entered wireless security information. You will need it when you
want to configure a Wireless Client to connect to the C300BRS4!
M. Select a security level for your Wireless
Network.
When a security level is chosen, the
Wizard will show fields for the required
information.
N. If you want to secure your network with
WEP encryption, select "WEP" from the
drop-down list. Enter the WEP key in ASCII
format (input: A-Z, 0-9).
Note:
Through the Wizard you can only configure
WEP 64Bits.
O. If you want so secure your network with
WPA or WPA2 (with Radius Server), select
"WPA" or "WPA2" from the drop-down
list.
Enter the IP Address of the Radius Server,
the Shared Key and confirm the Shared Key
in the second field.
Security – WEP Encryption
Security – WPA / WPA2 Encryption
42