Sony SCD-XB770 Mode D'emploi page 22

Listening to a Multi-
channel Super Audio CD
(Multi-channel management function)
This player is equipped with a Multi-channel
management function that sets the playback mode of the
Super Audio CD by the DSD-DSP (built into the player)
according to the layout or size of your speaker.
Example of the speaker layout
Front speakers
L
Center speaker
Sub woofer
L
Surround speakers
To set the Multi-channel management:
1 Select the appropriate preset playback mode (2 channel
playback or Multi-channel playback).
2 Adjust the output level balance of each speaker (only
when you select the Multi-channel playback mode).
Notes
• This features only work when you play the Super Audio CD.
• You may not be able to adjust the output level balance
depending on the speaker layout mode that you selected.
MENU
./>
22
GB
1
2
3
R
R
4
5
Note
You cannot operate this function when the player is in the CD or
Multi-channel playback mode. Operate this function when the
player is in the 2 channel Super Audio CD playback mode, the
disc tray is opened, or no discs are in the player.
1
2
lAMSL
3
ENTER
LEVEL ADJ
Selecting 2 channel playback mode
Press MENU.
Turn l AMS L until "2CH SPK MODE" appears
in the display.
Press l AMS L.
The playback mode appears in the display.
Front speakers
Playback
mode
Each signal outputs directly from front
2CH Direct
speakers. No signal outputs from the Sub
woofer.
2CH + SW
a
Turn l AMS L until desired mode appears in
the display.
Press l AMS L.
Selecting Multi-channel playback mode
Press MENU.
Turn l AMS L until "MCH SPK MODE"
appears in the display.
Press l AMS L.
The playback mode appears in the display.
Front
Playback
speakers
mode
Each signal outputs directly from each
MCH Direct
speaker.
Large
5 – Large + SW
Large
5 – Large
Small
5 – Small + SW
Large
FRT – Large +SW
Large
FRT – Large
Large
No – CNTR + SW
Large
No – CNTR
Sub woofer
a
Center Surround Sub
speakers
speaker woofer
Large Large a
Large Large ––
Small
Small a
Small Small a
Small Small ––
Large
–– a
–– Large ––