Publicité
06
1
Insert the pipe into the fence cloth cover
and butt with the T-Type connector, then
connect each corner with the suction cup
connector.
2
The bottom frame installation is cover
and completed. (Note to check whether
the buckle is aligned.)
3
Insert the corresponding upright pipe into
the fence cloth cover to install the fence
wall.
4
Install the upper guardrail pipe of the
playpen and butt with the T-Type
connector, then connect each corner with
the plastic connector.
Note
·The product is suitable for children over 10 months.
·This product is for adult assembly only. Fasten the accessories after
installation.
·Please place on a flat, uncluttered floor;
·Please use under adult supervision and prevent children from
climbing.
·Keep away from source of fire.
·Appropriate open areas should be left around the installation area.
*Please place in a space with good lighting conditions.
·Don't place in water or on permeable ground.
·Don't use it upside down.
·Check all the parts are firm before use.
·Please regularly clean the fence with a neutral detergent to allow
your baby to play in a clean and hygienic environment.
·lf there are extra parts after installation, please recheck the
installation steps.
07
Publicité
