Publicité
Les langues disponibles
Les langues disponibles
Bluetooth®
[INITIALIZE]
[YES]: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ; [NO]: Cancels.
Bluetooth test mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold
.
"PLEASE PAIR YOUR PHONE PIN 0000" appears on the display.
2
Search and select the name of your receiver ("KDC-X305"/
"KDC-BT382U"/"KDC-BT35") on the Bluetooth device.
3
Operate the Bluetooth device to confirm pairing.
"TESTING" flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing status
HF CNT:
Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility
PB DL:
Phonebook Access profile (PBAP) compatibility
To cancel test mode, press and hold B SRC to turn off the unit.
Bluetooth — Audio
• Operations and display indications may differ according to their availability
on the connected device.
• Depending on the connected device, some features may not work with
your device.
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
Listen to the audio player via Bluetooth
1
Press B SRC repeatedly to select BT AUDIO.
2
Operate the audio player via Bluetooth to start playback.
To
On the faceplate
Press 6 IW.
Play back/pause
Select group or folder
Press 2
Reverse skip/Forward skip
Press S / T.
Reverse/Fast-forward
Press and hold S / T.
Repeat play
Press 4
[ALL REPEAT], [FILE REPEAT], [GROUP REPEAT],
[REPEAT OFF]
/ 1
.
repeatedly.
ENGLISH
19
Publicité
