Publicité
Les langues disponibles
Les langues disponibles
EnGLIsh
BRUSHLESS CORDLESS COMPACT IMPACT DRIVER
DCF860
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Power output
No load speed
Mode 1
Mode 2
Mode 3
Max torque
Tool holder
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841‑2‑2:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K
(uncertainty for the given sound level)
Vibration emission value a
=
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841‑2‑2 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
24
WALT one of the
e
DCF860
V
18
DC
1
Li‑Ion
W
700
rpm
0–1800
rpm
0–2500
rpm
0–3800
Nm
282
mm
6.35
kg
1.1
dB(A)
95
dB(A)
103
dB(A)
3
m/s
2
21.0
m/s
2
2
EC‑Declaration of Conformity
Machinery Directive
Cordless Impact Driver
DCF860
D
WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841‑1:2015+A11:2022;
EN62841‑2‑2:2014+AC:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D
WALT, Richard‑Klinger‑Straße 11,
e
65510, Idstein, Germany
15.12.2023
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
Cordless Impact Driver
D
WALT declares that these products described under
e
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841‑1:2015+A11:2022; EN62841‑2‑2:2014+AC:2015.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
WALT at
e
WALT.
e
DCF860
WALT at the following
e
WALT.
e
Publicité
