Tripp-Lite DWM1742S Manuel De L'utilisateur page 9

6. Hook the TV onto the Wall Mount
4mm
Using an assistant or mechanical lifting equipment, lift the display with attached VESA plate. Set the
VESA plate's upper thumbscrews over the top flange of wall plate arm. Make sure the VESA plate's
lower screws fit inside of the wall plate arm's lower hole.
· Position a level on the horizontal and vertical sides of the display and adjust as needed.
· Reattach the lower knobs to the VESA mount (removed in step 1). Using the supplied wrench, tighten all
upper- and lower-knobs.
9
14-03-250-933333.indb 9 5/6/2014 2:06:57 PM