Tripp-Lite DWM1742S Manuel De L'utilisateur page 5

3a. Mount on Wood Stud Wall
• Make sure that mounting screws are anchored into the center of the studs.
Use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
14-03-250-933333.indb 5
Find a wood stud location for
mounting the wall mount
Anchor Bolt
WARNING
5
1 2
Mark the exact location of the
mounting holes
3
Drill pilot holes
Screw the wall
mount onto
the wall
5/6/2014 2:06:51 PM