Charging The Jump Starter - Arctic Cat 7639-835 Manuel D'utilisation

5. FEATURES
3
2
1
1. LCD display
2. ON/OFF switch
3. Micro USB input port
for recharging
4. USB port – 2.1A
5. USB port – 1A
6. Jump start output socket
7. Display ON/OFF button

6. CHARGING THE JUMP STARTER

IMPORTANT! CHARGE IMMEDIATELY AFTER PURCHASE,
AFTER EACH USE AND EVERY 30 DAYS, OR WHEN THE
CHARGE LEVEL FALLS BELOW 85%, TO KEEP THE INTERNAL
BATTERY FULLY CHARGED AND PROLONG BATTERY LIFE.
6.1 CHECKING THE LEVEL OF THE INTERNAL BATTERY
1. Slide the ON/OFF switch to the ON position. The LCD display will show
the battery's percentage of charge. A fully charged internal battery will read
100%. Charge the internal battery if the display shows it is under 85%.
2. To reduce the risk of electric shock, unplug the unit's wall charger
from the outlet before attempting any maintenance or cleaning.
Simply turning off the controls will not reduce this risk.
3. When charging the internal battery, work in a well ventilated area and
do not restrict the ventilation in any way.
6.2 CHARGING THE INTERNAL BATTERY
WARNING! Use only the chargers included with the unit to charge the
internal battery. Using any other charger will damage the unit.
1. Using the AC wall charger: Connect the micro USB end of the
charging cable to the micro USB port on the jump starter. Insert the
USB end of the cable into the USB port on the wall charger. Plug the
AC charger into a live AC outlet.
Using the 12-24V DC car charger: Connect the micro USB end
of the charging cable to the micro USB port on the jump starter.
Insert the USB end of the cable into the USB port on the 12-24V car
charger. Plug the car charger into a DC power outlet.
4
5
6
7
8
8. Battery clamps/smart cable
Not shown:
9. LED light (on back)
10. 100V~240V AC wall charger
11. 12-24V DC car charger
12. Micro USB-USB
charging cable
13. Carrying case
• 5 •