Appendix 3 - Arm-To-Blower Direct Installation - AirSTORM 11348238 Guide D'utilisation Et D'entretien

APPENDIX 3 - ARM-TO-BLOWER DIRECT INSTALLATION

3.1 Unpack capture arm, hood, and base
STEP 1. Unpack capture arm, hood, and base.
3.2 Attach swivel base to mounting plate
STEP 2. Attach swivel base to mounting plate.
• Mount Swivel Base to Mount Plate.
• Tighten all Bolts (8) with Washers (8)
• Toque each bolt to 23 N m
Quantity
1 Mounting Plate
1
8 1/4'' Bolt, Socket Cap
8
16
Capture Arm
Swivel Base
Vent Hood
Hardware
Swivel Base
1/4'' Washer