Publicité
STEP 1 - Placement of Arm on the Wall
1
INSTRUCTIONS
1. MOUNTING CONSIDERATIONS:
• Wall Mount Bracket MUST be attached to a stud or solid concrete. DO NOT attach this product to hollow wall or any other
confi guration.
• Make sure Arm will have desired unobstructed range of motion: up-down, side-to-side, in-out (see section RANGE OF MOTION).
• Make sure cables will reach their destinations with enough remaining slack to allow Arm full range of motion.
• Use the RANGE OF MOTION section to familiarize yourself with the movements of this product. Take into account that the TV will
change location from Side-to-Side when pulled out from the wall.
• Use the SPACE REQUIREMENTS section for maximum measurements of this products full range of motion.
• If there is no available stud for desired TV location, you may want to insert horizontal studs into your wall at the desired mounting
location (see "Horizontal Studs" image below).
2. CHOOSE YOUR DESIRED TV LOCATIONS:
Choose your desired TV locations when stowed and extended. Note the TV will move side-to-side when pushing it into and pulling
it out from the wall as well as lifting it up and lowering it down. This step requires an understanding of this products Range of
Motion (see section RANGE OF MOTION).
3. CHOOSE AN AVAILABLE WALL MOUNTING LOCATION:
Find an available stud or area of solid concrete to attach the
Wall Mount Bracket to that will allow your TV to be stowed
and extended as desired.
Place the Template on the wall. When the Wall Mount Bracket
on the Template is lined up with the mounting location on
the wall (stud or concrete), the 'TV ARC' lines will show you
the available locations of the center of your TV when stowed
against the wall.
Once you've lined up the mounting location to a stud
or solid concrete that will place your TV in your desired
locations, use a punch to mark your wall at the 2 Mounting
Hole locations on the Template. Then remove the template
from the wall.
RANGE OF MOTION
Front view with arm pushed back against the wall.
19.99"
(508mm)
SPACE REQUIREMENTS
10"
(254mm)
12.65"
(321mm)
16.94"
(430mm)
Distance from the Wall
side
PN:888-45-222-W-04 revJ: 45-284-026: OM1100549
front
Horizontal Studs
Top view showing range of motion when pulled out from
the wall.
16.55"
(420mm)
7.68"
(195mm)
3.44"
(87mm)
24.5" (622 mm) +
Thickness of TV
18.19" (462 mm) + Thickness
*Space requirement dimensions assume mounting holes are centered on the TV.
of TV
top
top
If there is no available stud for
desired TV location, you may
want to insert horizontal studs
into your wall at the desired
mounting location.
front
Horizontal Space Requirements
33.76" (858 mm) + Width of TV*
Vertical Space
Requirements
20" (508 mm) + Height
of TV*
front
Publicité
