Télécharger Imprimer la page

Husqvarna HDE4P Mode D'emploi page 7

Publicité

Les langues disponibles

Les langues disponibles

4. For safe operation
• Keep spray materials locked up and
out of reach of children and animals.
• Use only original manufacturer's
replacement parts.
• As a rule, mix your chemicals in a
separate container from which to fill the
sprayer. Do not mix formulas inside the
sprayer. Where an exception is made
(e.g. with liquid fertilizers), fill sprayer
with water BEFORE adding the active
ingredient.
• Always sift formula through the screen.
If there is no built-in strainer, use a
screened funnel.
• Never fill the sprayer with hot liquids.
Max. 30°C, or 85°F.
• Never use gasoline or other flammable
materials.
• Before cleaning or servicing the
sprayer, allow all pressure to escape.
Do not store or transport sprayer under
pressure.
• After each use, wash the sprayer—
including hose, lance and shut-off
valve—with plenty of fresh water.
Unless spraying is to be continued
within hours,
drain chemical formula and thoroughly
rinse the tank and all liquid ducts.
• Never store chemicals in your sprayer
for any length of time
• Do not leave the sprayer in reach of
children or persons not qualified to
handle it in proper fashion.
• When not in use—and especially
during prolonged storage—keep your
sprayer in a protected place away from
direct solar heat.
• Make sure the spray hose loops freely
without kinking or squeezing.
4. After using sprayers and other
equipment, CLEAN UP! Dispose of
debris in trash receptacles.
MAINTENANCE
1. In order to maintain your product in
proper working order, perform the
maintenance and checking operations
described in the manual at regular
intervals.
2. Examine the sprayer at intervals for
loose fasteners and rusted or damaged
parts.
Use special care for chemical leakage.
3. Clean and rinse tank and spraying
assembly after each use to prevent
crystallizing, which would later cause
clogging and chemical damage to the
unit.
4. All service except for those described in
this manual should be performed by
competent service personnel.
5. When replacing the any other part, or
any lubricant, always be sure to use only
Husqvarna products or products which
have been certified by Husqvarna for use
with the Husqvarna product.
6. In the event that any part must be
replaced or any maintenance or repair
work not described in this manual must
be performed, please contact a
Husqvarna authorized servicing dealer
for assistance.
7. Do not use any accessory or attachment
other than those bearing the Husqvarna
mark and recommended for the unit.
8. Under no circumstances should you ever
take apart the product or alter it in any
way. Doing so might result in the product
becoming damaged during operation or
the product becoming unable to operate
properly.
TRANSPORTATION
• Clean and rinse tank and spraying
assembly after each use to prevent
crystallizing, which would later cause
clogging and chemical damage to the
unit.
• Drain the content from the tank before
transporting or storing the sprayer.
• Secure the unit carefully to prevent
movement when it is transported.
• A unit that receives a strong shock
during transport and unloading may
malfunction.
STORAGE
• Clean and rinse tank and spraying
assembly after each use to prevent
crystallizing, which would later cause
clogging and chemical damage to the
unit.
• Do not store sprayer under pressure,
or with spray solution in tank.
• When storing the sprayer, choose a
space indoors free from moisture and
out of the reach of children.
DISPOSAL
• When disposing of your machine, or
chemical, be sure to follow your local
regulations.
HDE4P
U
S
US-5

Publicité

loading