Télécharger Imprimer la page

Philips AZT9240 Mode D'emploi page 9

Publicité

Les langues disponibles

Les langues disponibles

ECO-PLUS NiMH battery information
rechargeable ECO-PLUS NiMH batteries AY 3362 only)
Recharging works only on players with supplied rechargeable
ECO-PLUS NiMH batteries AY 3362.
Recharging the ECO-PLUS NiMH batteries on board
1 Make sure you insert the rechargeable ECO-PLUS NiMH
batteries AY 3362.
2 Connect the mains adapter to the 4.5V DC socket of
the player and then to the wall socket.
A is shown and ChArGE is displayed for 5
y
seconds.
• Recharging stops after a maximum of 7 hours, or
when you start playback.
3 When the batteries are fully recharged,
FULL appear briefly in the display, before the
display switches off.
Notes: – It is normal for the batteries to become warm
during recharging.
– If the batteries become too warm, recharging will be interrupted for
approximately 30 minutes and Hot is displayed.
– To ensure proper recharging on board, take care that contacts are clean, and
you are using only the ECO-PLUS NiMH batteries AY 3362.
Rechargeable ECO-PLUS NiMH battery handling
• Recharging already charged or half-charged batteries will shorten their lifetime.
Therefore, after using the rechargeable ECO-PLUS NiMH batteries a few times,
discharge them completely before recharging.
• To avoid a short circuit, the batteries should not touch any metal objects.
• When the batteries quickly become empty after recharging, the contacts are dirty
or the end of their lifetime has been reached.
POWER SUPPLY
(for versions supplied with
and
9

Publicité

loading