Costway PW10082BL Instructions page 5

Directions for use
1.Unfolding frame
Take out the frame, stretch the body bracket rods to both sides,
and then insert the handlebars into the holes until the shrapnel
on the handlebar tubes on both sides pop out.
2.Install & disassemble front wheels
As shown in the picture, insert the front wheel into the hole of
the front wheel seat and hear the "click".
Hold the removal button and pull it down, the front wheel can be
removed.
08
Rear wheel set
lron gasket
Rear wheel axle
Rear wheel
3.Install & disassemble rear wheels
As shown in the picture, first put the iron gasket, rear wheel set
and rear wheel on both sides of the rear wheel axle, then insert
rear wheel set to rear wheel tube, and the sound of "click" can
be heard. When it needs to be disassembled, press the shrapnel
on the inside of the rear leg tube and pull it down; Hold the
remove button and pull it out, the rear wheel can be removed.
4.Folding frame
In the braking state, first press down the shrapnel on both sides
of the handle tube, then pull out the handle upwards, and
thenpress the support rods on both sides of the body inward.
09