Techno Block WP Série Notice De Mode D'emploi Et D'entretien page 25

WS
Install the evaporator as follows:
B) open fan cover A by unscrewing the 2 screws B; drill the holes in the ceiling keeping the necessary
distance from the wall.
Secure the evaporator with the material supplied.
Mod.
Mod.
1
RDV1
2
RDV2
Electrical connection of evaporator: connect the evaporator using the wires supplied; pay attention to wire and
terminal board numbers. Close the connection box and fix the cable so that it does not interfere with fan
operation.
Close evaporator cover by repeating operations A) in reverse order.
Connection of refrigerating system: use the specially-supplied shut down valve connections on the condensing
unit and on the evaporator. With closed shut down valves put pipe fittings in vacuum conditions; then open the
cocks and start the unit.
Fit a drain line to the condensate water drain connection in the lower part of the evaporator.
A
A
508
928
Mod. D
1 508
2 928