Free Room - Techno Block WP Série Notice De Mode D'emploi Et D'entretien

6.4

Free room

When installing the unit leave enough free room to allow opening, correct use and easy maintenance in safe
conditions.
6.5 Installation WP
Place the condensing unit on the floor.
Install the evaporator as follows:
A) open fan cover E by unscrewing the 4 screws F; drill the holes on the wall of the coldroom keeping the
necessary distance from the wall
Secure the evaporator with the material supplied.
Electrical connection of evaporator: connect the evaporator. Close the connection box and fix the cable so that it
does not interfere with fan operation.
Close evaporator cover by repeating operations A) in reverse order.
A B C D
1 330 420 21 47
2 550 420 21 47
Ø1 Ø2
30 9
30 9