Buffalo HT993 Manuel D'instructions page 5

Changing the Mixer Attachment
1. Turn Off the appliance.
2. Raise the mixer head as instructed previously.
3. Push the mixer attachment up and to the left to release.
4. Insert the desired attachment. Push up and to the right to lock it into place.
5. Lower the mixer head in place.
BUFFALO recommend the following uses for each attachment:
Mixer attachment
Spiral Dough
hook
Beater
Whisk
Operation
• Ensure that these instructions have been read thoroughly and the operation
of the appliance is fully understood before use.
• All personnel must be fully trained on the operation and safety precautions
of the Planetary Mixer.
Layout of Controls
• START button: Press to start the mixer.
• STOP button: Press to stop the mixer.
• Speed control knob: Use to set the speed of the mixer.
Mixing
WARNING: Always ensure the
appliance is turned off before
placing hands in the mixing bowl.
1. Raise the mixer head.
2. Fill the bowl.
3. Lower the mixer head and lock it in place.
4. Select the desired speed.
• BUFFALO recommend that you start with the slowest speed and increase the
speed gradually as necessary.
• Ensure the mixer head and bowl are fully locked in place or the mixer will
not work.
HT993_ML_A5_v1_20240319.indb 5 HT993_ML_A5_v1_20240319.indb 5
Intended use
Heavy mixes dough, pie pastry etc.
Firm mixes light pastry, cake/biscuit mix,
icings, fillings and mashed vegetables
Light mixes whipped cream, mayonnaise, egg
whites, pancakes and soufflés
START
button
EN
Suitable speed
Slow
Medium
Fast
Speed control
knob
STOP button
5
2024/3/19 15:47 2024/3/19 15:47