Esperia E260D PROVENCE Manuel D'utilisation page 107

14.6. Turn on the bicycle with the controller button on the handlebar.
14.7. Check the LED indicators on the battery and the handlebar controller to confirm
that the battery is charged.
15. Fully-charged battery
15.1. The battery is fully charged when the specific green light is displayed on the
charger.
NOTE: The charging can take 6-8 hours, depending on the residual charge level in
the battery.
15.2. Disconnect the battery charger plug from the 220V power socket.
15.3. Remove the second plug of the battery charger from the battery connector.
15.4. If removed from its housing, reposition the battery in the appropriate bicycle
housing and ensure it is well placed on the bottom.
16. Removing and repositioning the battery
16.1. Insert the key into the appropriate lock on the
side of the bicycle.
16.2. Push the key inward and turn it 180°, this will
release the battery from its housing.
16.3. After recharging the battery, reposition it on the
bicycle reversing the entire operation.
107