Esperia E260D PROVENCE Manuel D'utilisation page 101

4. Use of the bicycle
4.1. Press the display button on the handlebars indicated
in the righthand pane. The controller will turn on into
mode A, which is the one that guarantees minimum
motor power and maximum bicycle autonomy.
The "low" speed will light up.
4.2. If you wish to increase the motor assist power to
medium mode, just press the "+" button and the second
controller LED will turn on.
4.3. If you wish to increase the motor assist power to
maximum mode, just press the "+" button and the third
controller LED will turn on.
4.4. If you wish to decrease the motor assist power,
simply press the "-" button until the LED that determines
the medium or minimum assist power switches on.
CAUTION:
DO NOT PRESS THE "+" AND "-" BUTTONS AT THE SAME TIME. THE LEDS ON
THE RIGHT OF THE "+" BUTTON INDICATE THE BATTERY CHARGE LEVEL.
THE BATTERY IS FULLY CHARGED WHEN ALL FIVE LEDS ARE ON.
4.5. Should the bicycle not be used for 10 minutes, the controller will turn off
automatically, to start the bicycle just press the power button.
101