Publicité
Les langues disponibles
Les langues disponibles
HOW TO USE THE OVEN
• OVEN MODES
Pyro Mode - the oven takes
care of the entire inside oven
cleaning - Three choices are
possible ECO, NORM, SUPER
AUTOMATIC MODE
When the oven is on standby - only the time of day appears
on the display.
1- Select the type of dish you want to cook by turning the function
selector knob to the appropriate position.
.. PASTRY
FISH
MEAT
2- Turn the central button to the correct position for the chosen
recipe. Confirm your selection by pressing the same button.
Manual Mode - direct access to
cooking function modes, 9
choices are offered with a pre-
programmed temperature range
Keep warm Mode -
Keeping dishes hot
ROTISSERIE LEGUMES
DESSERTS..
AUTO Mode -
6 types of the dish are recorded. Each
menu suggests different recipes with pre-
programed data (quantity, temperature and
cooking time)
- FUNCTION SELECTOR CONTROL KNOB -
Defrost Mode
3- According to the recipe selected, the following will be
displayed:
• the heating elements in operation for the particular
programme, as well as the suggested shelf position for the
food to be cooked.
... Place the food in the recommended position
• a pre-programmed (fixed setting - not variable)
... the temperature display is static.
• The weight of the food to be cooked or the number of servings/
portions (variable setting, flashing display), can be chosen by
turning the central button. Select the most appropriate setting
and confirm by pressing the same button.
... the display indicating the weight of the food or the number
of servings becomes static.
The oven begins cooking in Automatic mode (the Auto sign
switch on the display) and the oven starts to heat up.
The indicator light flashes until the selected temperature
has been reached. An audible signal sounds at the end of
this operation and the indicator becomes fixed.
4- Each recipe is recorded with a cooking time.
The cooking time indicator light and the End of cooking
time indicator light appear on the display.
These settings can be adjusted by turning the programme
selector knob to "cooking time" or "end of cooking". The "cooking
time" or "end of cooking" display will start flashing. Using the
central button, modify the settings as required and then confirm
them. When you have finished, do not forget to turn the
programme selector knob back to
programme.
For more details about programming, refer to the chapter entitled
PROGRAMMING.
5- When the cooking time is up, the oven switches itself off
automatically. An audible signal sounds for 15 seconds to tell
you the cycle has ended and the "cooking time" and STOP
symbols flash.
. Turn the function selector knob to
the "cooking time" and STOP symbols will continue flashing.
The cooling fan will continue operating for a while and will only
stop when the oven has cooled down sufficiently.
At the end of the cooking, the indicator flashes again and stays
lighted even if the oven is switched off. It disappears only
when the temperature is sufficiently low.
NB: please note that all AUTO cooking programmes are done
without preheating. This means that the food must be placed
in the oven right at beginning of the programme.
14 GB
, to confirm a new
. If you do not do this
Publicité
