Connections
●
External equipment and cables shown are not
supplied with this TV.
●
Please ensure that the unit is disconnected from the
wall out before attaching or disconnecting any cables.
●
Check the terminal type and cable plugs are correct
for connection.
●
Use a fully wired HDMI compliant cable.
●
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor,
otherwise distortion of image / sound may occur or
operation of other equipment may be affected.
●
Please also read the manual of the equipment being
connected.
●
Please refer to eHELP for other connections (VIERA
Link connection etc.).
Connection Panels
4
5
1 USB 1/2/3
This symbol indicates DC operation.
2 HDMI 1/2/3
3 Ethernet connector
4 Component/Video terminal
5 Digital audio out
6 Antenna cable in
12
English
1
2
3
6
VHF/UHF Antenna
NTSC (National Television System Committee):
•
Analog television system
ATSC (Advanced Television Systems Committee):
•
Digital TV Standards include digital high-definition
television (HDTV), standard-definition television
(SDTV), data broadcasting, multi-channel surround
sound audio and interactive television.
Power cord connection
Power Cord
Connect after all other connections have been made.
Insert the power cord plug firmly into place.
55-inch model
Important:
●
Disconnect the power cord plug from the wall out
first.
●
The included power cord is for use with this unit
only.
Antenna connection
Back of the TV
VHF/UHF Antenna
Cable
●
You need to subscribe to a cable TV service to enjoy
viewing their programming.
●
A high-definition connection can be made using an
HDMI or Component Video cable. (p. 13)
Back of the TV
Cable TV
or