Panasonic TX-24LS500E Mode D'emploi page 19

EPG:
Press OK/► to enter the Program Guide menu.
Favourite:
Setup favourite channel list.
Channel Diagnostic:
Press OK/► to display some signal information on
the current digital channel, such as signal strength,
frequency, etc.
Channel Organizer:
This option allows you to organize channels.
System
Picture HDMI CEC Settings
Sleep Timer
Sound
Idle TV Standby
TV Placement
Channel
Environment
Shop Mode
System
Settings
HDMI CEC Settings:
CEC control: To select On or Off.
Device Auto Power Off: To select On or Off.
Tv Auto Power On: To select On or Off.
CEC Device List: Turn devices on and select [Enable]
to enable control of HDMI devices.
Sleep Timer: To select 15min, 30min, 45min, 60min,
90min, 120min or Off.
Idle TV Standby: To select After 1 hour of inactivity,
After 2 hour of inactivity, After 4 hour of inactivity, After
24 hour of inactivity or Off.
TV Placement: To select Desktop and Wallmount.
Environment: To select Home and Shop.
Shop Mode: To select E-Sticker.
Settings:
1. Lock: Click and lock the TV.
2. Power: Turn the Wake On Network and Network
Standby on or off.
3. Recording Storage: Put the storage device and
record the storage.
4. Privacy Notice: The content about privacy notice.
5. OSS License: The content about oss license.
The input
Press then press ▲/▼ to select your desired
source, and then press OK to confirm.
Off
Off
Desktop
Home
ATV
CABLE
ANTENNA
SATELLITE
AV
HDMI 1
HDMI 2
HDMI 3
Android TV Home
Channels setup
(ATV and CABLE)
Channels
Analogue setup
Set up your TV to receive broadcast signal.
Analogue setup: Select ATV and enter.
- Analogue Auto Tuning: Press OK to start the
automatic search process. The search may take a
few minutes.
- Analogue Manual Tuning: Press OK to enter the
interface.
Press ▲/▼ to set program, TV system or color system
item, then Press ▲/▼ select frequency and press OK
to search channel.
- Teletext Setup: Press OK and then use ▲/▼ to
select preferred teletext.
Digital Cable Tuning
Country or Region
Auto Tune
Manual Tune
LCN
Auto service Update
Digital Cable Tuning: Select Cable and enter.
Auto Tune: Press OK to start the automatic search
process. The search may take a few minutes. During
the process, you can press
to exit.
Manual Tune: Select the channel number and start to
scan
LCN: Select On or Off.
Auto service Update: Select On or Off.
Analogue Auto Tuning
Analogue Manual Tuning
Teletext Setup
Total Scanned: 0
On
On
and choose YES
19
English