SolaX Power X1-EVC Manuel D'installation page 65

13
14
Power on / Einschalten / Mettre sous tension / Encendido / Ligar / Inschakelen
/ Accensione / Zasilanie włączone / Zapnutí / Slå på / Pornirea / Включване на
захранването / Tænd / Ενεργοποίηση / Lülitage sisse / Kytke päälle / Uključite
napajanje / Bekapcsolás / Maitinimo įjungimas / Ieslēgšana / Zapnúť / Vklop / Güç
açma / Ligar a energia
• Turn on the RCBO.
• Check the status of the LED indicators: When the device is powered on, all the LED
indicators will be on for three seconds, then the system will start self-checking
automatically. After the checking process, the "AVAILABLE" light will be on when the
connector is not plugged and the "PREPARING" light will be on when plugged.
If the "Fault" light is on, please check if it is correctly installed and connected.
* For Plug Type
M4
1.2±0.1 N·m
M4
1.2±0.1 N·m
61