USAGE SAFETY
a)
If you are unsure about whether the product is operating correctly or if you find damage, please
contact the manufacturer's service centre.
b)
Only the manufacturer's service centre may make repairs to the product. Do not attempt to make
repairs yourself!
c)
Please keep this manual available for future reference. If this device is passed on to a third party, the
manual must be passed on with it.
d)
Keep packaging elements and small assembly parts in a place not available to children.
e)
If this device is used together with another equipment, the remaining instructions for use shall also be
followed.
f)
The device is not designed to be handled by persons (including children) with limited mental and
sensory functions or persons lacking relevant experience and/or knowledge unless they are supervised
by a person responsible for their safety or they have received instruction on how to operate the
device.
g)
Close the nearest water supply valve to the unit before making any adjustments, repairs or
replacements. This preventive measure reduces the risk of an accident.
h)
Device repair or maintenance should be carried out by qualified persons, only using original spare
parts. This will ensure safe use.
i)
To ensure the operational integrity of the device, do not remove factory-fitted guards and do not
loosen any screws.
j)
When transporting and handling the device between the warehouse and the destination, observe the
occupational health and safety principles for manual transport operations which apply in the country
where the device will be used.
k)
Clean the device regularly to prevent stubborn grime from accumulating.
l)
The device is not a toy. Cleaning and maintenance may not be carried out by children without
supervision by an adult person.
m) It is forbidden to interfere with the structure of the device in order to change its parameters or
construction.
n)
Do not allow the device to freeze. During winter or when the ambient temperature drops below 0°C,
dismantle the device and store it in a dry place.
o)
Do not use salt or other methods against freezing.
p)
The water pressure must not exceed 3.5 bar.
q)
To avoid burns, please pay attention to set the water temperature control lever to the "cold" position
before using the product. Then adjust the desired temperature.
ATTENTION! Despite the safe design of the device and its protective features, and despite the use
of additional elements protecting the operator, there is still a slight risk of accident or injury when
using the device. Stay alert and use common sense when using the device.
3. Use guidelines
The product is a shower designed for use in gardens, outdoor pools, spas and campsites. The shower uses solar
energy to heat the water.
The product is intended for home use only.
The user is liable for any damage resulting from unintended use of the device.
3.1.
Device description
Please note: The illustrations of this product can be found on the last page of the instruction manual.
3.2.
Assembling the device
INSTALLATION INSTRUCTIONS
1. 1 Choose a location that will receive as much sunlight as possible for the solar shower.
2. Mount the lower stand with shower base (B) to a concrete slab or wooden base using four
screws, washers and nuts (K).
3. Attach the shower head (D) with gasket (G) to the extension pipe (E). Attach the extension pipe
(E) with gasket (F) to the threads of the upper base (A). These parts should only be adjusted by
hand. Do not use a spanner.
EN