Bo Jungle B Mode D'emploi page 4

Connect with AiLink APP
1. Open the app and the
bluetooth of the phone
After entering the app,
+
click the " " button in
the upper right corner
as shown in figure 1.
3. Click the scanned
device to add
automatically, and it
will be displayed after
successful addition as
shown in figure 3.
5. Set the units on the
APP.
Made In China – Bo Jungle - Chamo BV – Brambroek 23B, 9500 Geraardsbergen – BELGIUM
www.bojungle.eu – office@bojungle.eu – Tel: +32 54 240 331 – Fax: +32 9 270 01 80
2. The APP automatically
scans nearby devices
when entering the
interface to add
devices, as shown in
figure 2.
4. Select the weighing
position on the app
and click "start".