Bo Jungle B Mode D'emploi page 2

EN
IMPORTANT! PLEASE READ CAREFULLY & KEEP FOR FUTURE REFERENCE
Thank you for choosing our product. Please take a little time to read the important
safety notes detailed below, as this will ensure many years of happy, safe use.
This electronic scale is a device for checking the baby's weight, it is especially useful for weighing newborns and premature
babies, where the weight is an exceptionally important development factor. We used our best efforts to make sure the product
is on top quality, comfortable and safe during weighing.
Device instruction
1. ON OFF button
• Press the button to switch on or off the device
• If you use a towel to lay the baby on, put the towel on the platform and press the button to set the display to "0.00"
2. UNIT button
• Press the button to adjust the unit of measurement : gram(g),kilogram(kg), pound(lb)or stone(st:lb)
3. Display (LCD)
• The size: 85x 28mm
Product specification
1) Device dimensions: 630X300X54mm
2) The Capacity: 50g ~ 20KG
3) Press ON, press OFF/auto OFF
4) Accuracy: d=0.005KG
5) 4 high precision strain gauge sensor
6) Tare function
7) Low battery and over load indicate
8) Auto lock/hold function (easier weighing of moving babies-the result is automatically locked weight)
9) Large LCD: 85x28mm
10) Battery: 3 x 1.5v AAA battery (not included)
Battery installation
1) Before using the scale, check the battery compartment and remove any plastic insulation strips.
2) Insert the batteries (3 x 1.5V AAA) into the battery compartment.
3) If you are replacing the batteries,make sure the positive and negative contacts are properly aligned.
Device operation
Weigh
1) Please use the scale one the hard & flat surface. Do not weight on carpet or any soft surface as it may affect accuracy.
2) Press " " button, the display shows "Hi" ;
3) After display reads "0.00kg" then it could be able to measure weight ;
4) Put baby or other stuff on the scale platform, and LCD display will auto lock the weight after 2 seconds;
5) Press " " key to turn off the scale , or scale will turn off itself after 30 seconds.
Reset and tare function
It could weight continuously:
1) First, put the first one baby on the scale platform to get weight;
2) Second, press " " button, display will turn back to zero, then put the next one on the scale. ( this function is repeatable).