Topaz L4T8B-15-35K-PCEM Instructions D'installation

Item:
L4T8B-15-35K-PCEM
L4T8B-15-50K-PCEM
EMERGENCY LINEAR T8 BALLAST BYPASS TUBES
INSTALLATION INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS!
 Make all electrical and ground connections in accordance with local codes or the National
Electrical Code. If you are not familiar with these codes and requirements, consult a
qualified electrician. This Professional should be familiar with the construction and
operation of this product and hazards involved. Failure to do so may result in serious
personal injury.
 To reduce the risk of fire, electric shock, personal injury, or property damage, please read
and follow all safety instructions. If you do not understand these instructions or if any
additional information is required, contact your local Topaz representative. Retain these
instructions for maintenance reference.
 Do not exceed the allowed supply voltage marked on the luminaire label information.
 Disconnect power at the circuit breaker panel before any installation.
 Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
 Do not expose wire to any sharp objects such as sheet metal to prevent wiring damage or
abrasion.
 While the light is on, please avoid direct eye exposure.
 Combustible material should be kept away from fixture/LENS.
 Do not make or alter any open holes in any enclosure or any electrical component during
installation.
 Do not use when the enclosure is damaged or broken in any way.
 Do not alter, relocate or remove wiring, lamp holder power supply or any other electrical
component.
 The battery in this device is not user serviceable. Do not incinerate.
 Installers should not disconnect existing wires from lamp holder terminals to make new
connections at lamp holder terminals. Instead, installers should cut existing lamp holder
leads away from the lamp holder and make new electrical connections to lamp holder lead
wires by employing applicable connectors.
SHUNTED LAMP HOLDER
www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
L4T8B-15-40K-PCEM
L4T8B-15-65K-PCEM
WARNING
CAUTION
DO NOT USE!
NON-SHUNTED
LAMP HOLDER