Sommaire des Matières pour Costway TL35688
- Page 1 Tool Cabinet Combo Armoire à Outils Combinée TL35688 USA office: Fontana AUS office: Truganina GBR office: Ipswich FRA office: Saint Vigor d'Ymonville THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Page 2 Before You Start Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order. We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
- Page 3 2. Start by placing the package on flat covered ground. Important 3. Remove all cardboard, honey comb board, foam packaging material and When you open the cartons, carefully check the contents and make sure clear plastic bags. that there is no damage. If you have any problems or you find any parts 4.
- Page 4 Parts List / Liste des Pièces ●AVERTISSEMENT NE SURCHARGEZ PAS LES PRODUITS! Le produit a une capacité de poids maximale de 200 lb (100 kg). No./Réf. Description/Description Qty/Qté. ●ATTENTION Top chest / Coffre supérieur SOYEZ PRUDENT lorsque vous ouvrez plus d'un tiroir. Le produit pourrait devenir instable et basculer, ce qui pourrait endommager le produit ou blesser quelqu'un.
- Page 5 EN: Remove the fixing plate EN: Remove the carton After removing the foam, press down the fixing plate and take it out from the Open the carton, place the cabinet on a level surface. cabinet. (Attention: The plate is used to fix the top chest, please discard it Get the cabinet from the carton.
- Page 6 EN: Get the parts EN: Tool Holder Assembly Open the drawer to take out the tool holder and caster box. Use M6x12 bolts (3) to assemble the tool holder with a screwdriver. FR: Sortez les pièces FR: Assemblage du porte-outil Ouvrez le tiroir pour sortir le porte-outil et la boîte à...
- Page 7 Return / Damage Claim Instructions DO NOT discard the box / original packaging. In case a return is required, the item must be returned in original box. Without this your return will not be accepted. Take a photo of the box markings. A photo of the markings (text) on the side of the box is required in case a part is needed for replacement.