HAMPTON BAY SIDLOW 72151 Guide D'utilisation Et D'entretien page 10

Assembly - Attaching the Light Kit Fitter Assembly
8
Attaching the light kit fitter assembly
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
□
Remove the three screws (QQ) from the light kit fitter
assembly (D).
□
Connect the wires exiting the bottom of the motor assembly
(B) by connecting the molded adaptor plugs together (blue to
blue, and white to white).
□
Slide the light kit assembly (D) and secure it to the switch
housing using the three screws (QQ) that were removed in the
first step.
9
Installing the shatter resistant plastic
shades and bulbs
WARNING: Allow the shatter resistant plastic shades to cool
completely before removing.
CAUTION: Make sure the power is off before attaching or
removing the shatter resistant plastic shades.
□
Insert the shatter resistant plastic shade (E) into the light kit
cowling and turn clockwise to tighten and secure the shatter
resistant plastic shade (E). Repeat for the remaining shades.
□
With power off, screw the LED bulbs (H) into the sockets.
□
Attach the pull chain extensions (AA) to the light pull chain
and fan pull chain.
D
D
E
H
10
B
QQ
AA