BE AGRI EASE QH1N Manuel De L'opérateur page 5

INSTALLATION & MOUNTING
MOUNTING NON-ASAE IMPLEMENTS
If the implement is not of ASAE specifications, use an Adapter Bracket (not provided) to mount it to the
Quick Hitch as illustrated below.
1. Remove the Top Hook by taking out the two Hex bolts (2), Lock Washers (6), and Nut (7). Save hardware.
2. Slide the Adapter Bracket (not provided) over the top bracket of the Quick Hitch and attach the top Link
Pin (not provided). For most implements, the front hole (closest to implement) is recommended for the
best vertical alignment.
3. Attach the implement to the Adapter Bracket tab with a Link Pin (not provided)
4. Check that all connections are tight before starting the work task
QH1N USER MANUAL
5