AKASO EK7000 Pro Manuel D'utilisation page 12

EN
If you record for 5 minutes and do not press the Shutter button to stop recording
and save, the camera records a new 5-minute interval by recording over your
previous 5 minutes of footage. When the memory card is full, the new files will write
over the old files if loop recording is on.
6. Time Lapse Interval: 0.5Sec, 1Sec, 2Sec, 5Sec, 10Sec, 30Sec, 60Sec
Default setting is 0.5Sec.
Time Lapse Video creates video from frames captured at specific intervals. This
option lets you capture a time lapse event and immediately view or share it as a
video. Time Lapse Video is captured without audio.
Note: Image Stabilization and Loop Recording are disabled when shooting a
time-lapse video.
7. Date Stamp: Off/On
Default setting is On.
If you turn on Date Stamp, this camera will add a date stamp to your videos and photos.
Note: This camera will not add a date stamp to your video when you shoot a time-lapse
video or image stabilization is enabled.
8. Exposure: -3, -2, -1, 0, 1, 2, 3
Default setting is 0.
By default, your camera uses the entire image to determine the appropriate
exposure level. However, Exposure lets you select an area that you want the camera
to prioritize when determining exposure. This setting is particularly useful in shots
where an important region might otherwise be over or underexposed. When you
change this setting, the display immediately shows you the effect on your image.
If you change modes, the camera returns to using the entire scene to determine the
correct level of exposure.
9. Photo Resolution: 20M/16M/13M/8M
Default setting is 20M.
10