AKASO EK7000 Pro Manuel D'utilisation page 21

EN
CR2032 BATTERY REPLACEMENT FOR EK7000 PRO REMOTE
1. Use a 1.8mm Phillips head screwdriver to remove the 4 screws on the back cover of
the remote, allowing you to open it.
2. Remove the other four screws in the PCB board.
3. Lift the PCB board and slide out the battery, as shown in the picture.
Note: Do NOT rotate the PCB board to avoid reversing the camera and video button
functions.
4. Install the new battery, keeping the "+" pole facing up.
19