Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DO9173J
COMPONENTS
1. Handle with soft grip
2. Mould
3. Juice outlet with anti-drip system
4. Head
5. Sieve
6. Dish
7. Stainless steel body
CLEANING PRIOR TO FIRST USE
Prior to using the appliance, it is recommended that the parts
be washed first in order to remove any residues of the production
process
USE
1. Unwind the electrical cord and plug in the unit.
2. Place a glass or bowl under the juice outlet for the juice.
3. Cut the fruit in the centre.
4. Press down the juice outlet for opening and the juice can flow out.
5. Raise the handle with the mould.
6. Place the fruit on the head and press it down.
7. Press for 15 sec. than let the unit rest for 15 sec.
8. Click the juice outlet up before removing the glass. Now the drips can't flow out
anymore.
CLEANING
•
When the operation has finished, unplug the unit.
•
Raise the handle and push the mould out of the handle via the recess provided.
Remove the sieve and the press cone as well.
•
Clean the parts under running water.
•
Remove the dish.
•
Clean the mould, the sieve and the dish in warm water with a mild detergent.
•
Clean the outside of the unit with a soft dry cloth.
•
Never immerse the unit in water.
Follow the next steps to re-install the juicer:
1.
Put the mould in the handle.
2.
Put the head in the sieve and put them together in the dish.
3.
Put these components completely in the juicer with a diag-
onal movement.
1
2
3
32
4
5
6
7
Publicité
Table des Matières
