Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
1. It is important that this manual is read and fully understood and that all instructions are fo-
llowed before using this product.
2. Inspect the machine and accessories for any damage or wear before use. Do not use the ma-
chine if it is not in good working order.
3. When a "DO NOT OPERATE" sign is placed on the product, do not operate until the sign has
been removed by designated personnel.
4. The product must be operated, inspected, maintained and repaired by a competently trained
person in accordance with applicable safety codes and regulations.
5. Do not use the machine to lift, support or transport people in any way.
6. Do not hoist loads over or near people.
7. Never work under or near hoisted loads.
8. The machine is for manual operation only. Do not attempt to use a motorized mechanical devi-
ce to operate the machine.
9. It is the responsibility of the operator to exercise caution, use good practice, common sense
and be familiar with proper rigging techniques.
10.
Improper use could result in death or serious injury.
11.
The supplier takes no responsibility for any form of consequential loss or damage as the
result of unauthorised repair or use of spare part other than those issued on behalf of the
manufacturer/supplier.
12.
If a unit is to be used in multi-immersion applications then the separate instructions for
multi-immersion use must also be followed.
The operating company is responsible for the proper and professional instruction of the
operating personnel. The personnel responsible for operation, maintenance or repair of the
product must read, understand and follow these operating instructions. These instructions are
intended to make the user familiar with the product and enable them to use it to the full extent of
its intended capabilities.
The operating instructions must always be available at the place where the product is
operated. Apart from the operating instructions and the accident prevention act valid for the
respective country and area where the product is used, statutory regulations and procedures
along with the commonly accepted regulations for safe and professional work must also be
adhered to. The indicated protective measures will only provide the necessary safety if the
product is operated correctly and installed and/or maintained according to the instructions. The
operating company must be committed to ensure safe and trouble-free operation of the product.
Health and safety at work
All lifting equipment must be maintained and tested to meet relevant statutory It is the
responsibility of every company to ensure that their employees have been fully and properly
trained in the safe operation of their equipment.
20
OPERATOR INSTRUCTION GUIDE
SAFETY INFORMATION
Publicité
