Black & Decker BXCG151E Instructions Originales page 5

♦ Do not use the appliance if the cable or plug is damaged.
♦ If the product enclosure breaks, immediately disconnect
the appliance from the mains to prevent the possibility of
an electric shock.
♦ Do not use the appliance if it has fallen on the floor, if
there are visible signs of damage or if it has a leak.
♦ Do not pull on the supply cord. Never use the supply
cord to lift up, carry or unplug the appliance.
♦ Do not wrap the supply cord around the appliance.
♦ Check the state of the supply cord. Damaged or tangled
cables increase the risk of electric shock.
♦ Supply cord should be regularly examined for signs of
damage, and if the cord is damaged, the appliance must
not be used.
♦ Do not use or store the appliance outdoors.
♦ Do not leave the appliance out in the rain or exposed
to moisture. If water gets into the appliance, this will
increase the risk of electric shock.
♦ Do not touch the plug with wet hands.
♦ Take care to avoid starting the appliance involuntarily.
♦ Before using the appliance ensure that the Removable
upper burr blade is properly fixed in place.
♦ Do not touch any of the appliance's moving parts while
it is operating.
♦ Exercise precaution after employing the stop operation
on the appliance as the blade/s will continue moving
from the effect of its own mechanical inertia.
Use and care:
♦ Fully extend the appliance's power cable before each
use.
♦ Do not use the appliance if it is empty.
♦ Do not use the appliance if the on/off switch does not
work.
♦ Do not move the appliance while in use.
♦ Do not turn the appliance over while it is in use or
connected to the mains.
♦ Do not force the appliance's work capacity.
♦ Respect the Max level.
♦ This appliance is for household use only, not profession-
al, industrial use.
♦ Store this appliance out of reach of children and/or
persons with physical, sensory or reduced mental or lack
of experience and knowledge.
♦ Do not store or transport the appliance if it is still hot.
♦ Keep the appliance in good condition. Check that the
moving parts are not misaligned or jammed and make
sure there are no broken parts or anomalies that may
prevent the appliance from operating correctly.
(Original instructions)
♦ Never leave the appliance connected and unattended if
is not in use. This saves energy and prolongs the life of
the appliance.
♦ Do not use the appliance for more than two cycles for
each load of coffee beans, allow the appliance a resting
period of at least one minute between each cycle. Under
no circumstances should the appliance be operated for
more time than necessary.
Service:
♦ Make sure that the appliance is serviced only by special-
ist personnel, and that only original spare parts or acces-
sories are used to replace existing parts/accessories.
♦ Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability
null and void.
DESCRIPTION
A Coffee bean hopper lid
B Removable upper burr blade
C On/off Button
D Cup selector knob
E Ground Coffee holder
F Coffee bean hopper
G Coarseness selector knob
H Base
I Cleaning Brush
J Body
INSTRUCTIONS FOR USE
Before use:
♦ Make sure that all products' packaging has been
removed.
♦ Before using the product for the first time, clean the parts
that will come into contact with the coffee in the manner
described in the cleaning section.
♦ Some parts of the appliance have been lightly greased.
Consequently, the first time the appliance is used a light
smoke may be detected. After a short time, this smoke
will disappear.
CAUTION:
♦ Always operate the mill with the safety lid (A) securely
in place.
♦ Keep hands and utensil out of the coffee hopper while
ENGLISH
5