Whirlpool MTK1527 Instructions D'installation page 5

4. Mark the three mounting holes through the bottom duct onto
the cutout floor.
A. Bottom duct mounting holes C. Bottom duct
B. 123# screws (3)
5. Using 7/64" drill, drill pilot holes into the three holes marked in
Step 4.
6. Realign and install the bottom duct with three short screws.
7. Using 7/64" drill, drill pilot holes through the four mounting
holes of the bottom duct flange into the bottom front facing of
the cutout/cabinet opening.
Install the Microwave Oven
1. Position microwave oven near cutout opening.
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2. Plug in microwave oven.
Electrical Shock Hazard
D.Cabinet
A. Bottom duct flange
B. Mounting holes
WARNING
Electrical Shock Hazard
3. Slide the microwave oven back and into place. The
mounting holes of the rail flanges and bottom duct
flange will align against the bottom front facing of the
cutout/cabinet opening.
4. Secure the microwave oven to the cutout/cabinet by installing
four 123# screws into the mounting holes.