Step 11
O/P/Q
11.After inserting the PC roof panels, insert the aluminum middle roof joints Middle Roof Joint (O),
Middle Roof Joint (P ) Middle Roof Joint(Q) into the roof rafters.
Notes:
The drain holes on the aluminum middle roof jointsMiddle Roof Joint (O), Middle Roof Joint (P )
Middle Roof Joint(Q) should be at the bottom.To adjust the middle joints to line up : once all
polycarbonate roof panels are in place,use a small piece of wood and hammer, then tap down on
the middle of the joint bringing,it down and holding at the same time the joint and top polycarbonate.
Do not tap too hard.
Q
O
P
Q
Before
This side up !
O/P/Q
O
P
Q
Q
P
O
A er
42
P
O
O/P/Q