Publicité
Les langues disponibles
Les langues disponibles
STEP 4:
ATTACHING FOLDING SIDE ARMS ON WALL
1. Using a level ensure that bottom two holes (D3 & D4) are vertically straight.
2. Attach Folding Side Arm (#1) to wall with 2 pcs of Screws (#6) and Washers (#7) using a screwdriver.
3. Repeat the process with Folding Side Arm (#2) in holes (D7 & D8)
Left
1
(D3)
(D4)
STEP 5:
ATTACHING THE CONNCTING BAR TO WORKBENCH
1. If using 24" wall stud spacing, use inside holes on bottom of workbench. If using 32" wall stud spacing, use outside holes.
2. Attach Connecting Bars (#3) to bottom of workbench (#5) with 4 pcs of bolts (#9), spring washers (#10), and washers (#11) using a screwdriver.
NOTE: Ensure that the holes on the connecting rods are at the rear of the workbench.
3
5
Right
2
(D7)
(D8)
9
10
11
7
6. Hexagon Screw,
ST6.3x65
6
Washer, Φ8.5x1mm
7.
7
Please contact 1-888-HD-HUSKY for further assistance.
Level
X 4
Phillips
X 4
Screwdriver
9.
Bolt, M6x16
10.
Spring washer
11.
Washer, Φ6.5x0.8mm
HUSKYTOOLS.COM
X 4
X 4
X 4
Publicité
