afriso ProCalida IN 1 1/2 Notice Technique page 30

6.3 Adjusting the flow valves
6.3.1 With flow meter
6.3.2 Without flow meter
 Use the "Determining the flow rate" to determine the value to be adjusted.
Commissioning
A
1. Open the flow valve until
the calculated water vol-
ume (A) is indicated at the
flow meter.
2. Turn the ring all the way to
the mechanical stop of the
flow valve.
1. Close the flow valve.
2. Set the adjustment value
(A) via the ring.
A
3. Open the flow valve.
ProCalida® IN1½
EN
14