Publicité
Les langues disponibles
Les langues disponibles
Information for installation
To avoid disturbing, visible cables later, the power connection should also be
Power connection
planned before installation.
Work on the electrical installations must only be carried out by
Danger!
qualified personnel. If an additional socket is required for the
appliance, commission a specialist electrical firm.
The statutory regulations must be complied with so that the plug is also
Accessibility of power supply
accessible. This means that it must still be possible to reach the plug even once
the two chimney sections have been installed. However, if after installation the
plug is not accessible, a switch must be installed, in accordance with the standards
DIN EN 60335-1 and IEC 61058-1, that ensures an all pole disconnection of the
appliance.
The installation and electrical installation should only be performed by an
authorised specialist.
We cannot accept any liability in cases of improper use or incorrect handling.
The extraction hood complies with European directive 2014/30/EU for radio
interference.
Information
9
English
Publicité
