Monster TULPAR T7 V24.1 Mode D'emploi page 6

EN
System Software
Your computer may already come with system software pre-installed. Where this is not the
case, or where you are reconfiguring your computer for a different system, you will
find this manual refers to Microsoft Windows 10.
Intel® Optane™/RAID Support
Note that your system can be set up as a RAID OR to support Intel® Optane™, but it cannot
be set to support both systems. You need to setup Intel® Optane™ or RAID before installing
your Windows 10 operating system.
Shut Down
Note that you should always shut your
computer down by choosing the Shut
down command in Windows (see below).
This will help prevent hard disk or
system problems.
1. Click the Start Menu icon .
2. Click the Power item .
3. Choose Shut down from the menu.
Intel® Optane™ Setup
Intel® Optane™ is a combination of a compatible memory device and Intel Rapid Storage
Technology software. This combination is designed to speed up your system performance
by caching boot data, executables, frequently accessed data and system page files to a non
volatile, low latency Intel® Optane™ SSD.
Contact your distributor or supplier to see if your system supports this technology.
Intel® Optane™ Setup Procedure
You need to setup Intel® Optane™ before installing your Windows 10 operating system,
and you will need to prepare the following in order to do so.
•
The Microsoft Windows 10 OS on a DVD or USB flash drive.
•
An Intel® Optane™ SSD installed in your system.
• The Device Drivers & Utilities + User's Manual disc.
1. Start-up your notebook computer and press F2 to enter the BIOS and go to the
Setup Utility.
2. Select the Advanced menu
3. Select VMD Mode, press Enter and select Intel RST Premium... and select <OK>.
06