Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
CHANGING THE LIGHT BULB
1. Set the thermostat knob to the off position
(0) then unplug the appliance.
2. Remove the food.
3. Push upward to remove the light shield.
4. Unscrew the bulb and screw a new bulb of
the same shape same power (230V-10W E14
base).
5. Attach the light shield.
CLEANING
1. Unplug the appliance.
2. Remove all substances.
3. Clean the inside and outside walls with a
clean sponge or soft cloth using warm water
or 1 teaspoon of bicarbonate of soda to 1.2
liters of water.
4. Rinse well and wipe dry with a clean soft
cloth.
If the appliance is not to be used for a long
period of time then it is recommended to
remove all the food stuff, clean the inside of the
appliance and leave the door open to allow the
air to circulate thus avoiding unpleasant odors.
GB-26
TROUBLESHOOTING
Before calling for service please check the
following.
THE APPLIANCE IS NOT WORKING.
Check the plug is inserted correctly into the
mains socket.
Check there is power to the mains socket by
plugging another appliance in, if the other
appliance do not work either, check the fuse in
the plug.
THE APPLIANCE IS NOISY WHEN OPERATING.
Check the appliance is level and it is not in
contact with another appliance or kitchen
furniture.
THE APPLIANCE DOES NOT COOL
SUFFICIENTLY.
If the door has been opened too often or it has
been left open for a while it will take time for
the appliance to reach its set temperature.
Check the airflow over the rear of the appliance
has not been reduced due to insufficient
clearance.
Check if a large quantity of fresh food has been
introduced.
ENGLISH
GB-27
Publicité
