Publicité
Les langues disponibles
Les langues disponibles
26
Operating instructions
• You use not correct cookware. The symbol
vates automatically after 2 minutes.
• You do not deactivate a cooking zone or change the heat setting. After some time,
comes on and the appliance deactivates. See the table.
The times of Automatic Switch Off
Heat setting
The cooking zone
deactivates after
The heat setting
Touch the control bar at the heat setting. Change
to the left or the right, if it is necessary. Do not
release before you have a correct heat setting. The
display shows the heat setting.
Bridge function
The Bridge function connects two cooking zones and they operate as one.
First set the heat setting for one of the cooking zone.
To activate the Bridge function touch
the control sensors.
To deactivate the Bridge function touch
Automatic Heat Up
You can get a necessary heat setting in a shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat setting for some time (see the illustration),
and then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a cooking zone:
1.
Touch
2.
Immediately touch the necessary heat setting. After 3 seconds
play.
To stop the function change the heat setting.
-
6 hours
12
11
10
9
8
7
6
5
4
3
2
1
0
1
2 3 4 5 6 7 8 9 10 11 12 13 14
(
comes on in the display).
comes on and the cooking zone deacti-
-
5 hours
4 hours
. To set or change the heat setting touch one of
. The cooking zones operate independently.
-
-
1.5 hours
comes on in the dis-
Publicité
