Publicité
Les langues disponibles
Les langues disponibles
C
Adjust the harness (See Fig. E1, E2,E3)
1. Snap the waist buckle(d). Adjust the length of
waist strap(e) in order to make sure it is securely
positioned in your hips.(See Fig E2)
2. Tighten the shoudler strap(a)and remember to
leave a small gap over the shoulder to distribute
weight of battery over shoulders to balance weight.
(See Fig E3)
3. Snap the chest buckle(b) and adjust chest strap(c)
before work. (See Fig E3)
WARNING: Do not wear other shoulder straps
when using this backpack harness.
E1
a
c
f
e
E2
1
a
b
f
d
2
E3
3
Connect the harness with your machine
(See Fig F1, F2)
F1
1. Insert the battery adaptor into the Kress cordless
handheld tool. Follow the instructions in the tool's
manual to start the tool.Remove the adaptor from
the tool after use.
NOTE: If you hear a beep sound during operation,
it could indicate a short circuit due to power cord
damage. Please stop working immediately. Remove
the battery pack, and replace the power cord.
F2
1
2
NOTE: For better weight distribution, a weight kit
is supplied with the backpack harness.
1. LIft the ring and rotate the screw in a
1
2
EN
7
Publicité
