Télécharger Imprimer la page

Grote 79276 Serie Guide D'installation page 2

Publicité

Les langues disponibles

Les langues disponibles

Cig Plug Models : +12VDC only
STEADY WITH SLOW BURSTS
(RED connected to POWER and BLACK connected to GROUND)
In this mode, when power is applied to RED, the light will illuminate in a Steady Burn Mode and will occasionally flash OFF to attract attention.
Please Note:
This mode CANNOT be used with a flasher.
For night time use only. This light has a built-in photocell that dims the light to 10% in the daylight.
Headlights and other bright lights can trigger the photocell to dim the light into "day mode".
EXTERNAL FLASHER MODE
(RED connected to POWER and both GREEN and BLACK connected to GROUND)
In this mode, the RED wire must be connected to an external flasher to flash.
Please Note:
• This mode MUST be used with a flasher.
• The flasher MUST have an on-time of no more than 50%. Longer on-times will dramatically reduce the life of the light and will void the warranty.
• The photocell is NOT active in this mode.
LIMITED WARRANTY
Grote Industries, Inc. ("Grote") warrants its products to be free from defects in material and workmanship under normal use and service as set forth in this Limited Warranty. THIS LIMITED WARRANTY is the final, complete and exclusive expression of
warranty to the purchaser and cannot be modified except in writing signed by an authorized officer of Grote.
LED FIVE-YEAR LIMITED WARRANTY
Subject to the following conditions, Grote warrants to the original purchaser only (and not to anyone else) of each new LED product made by Grote that any part thereof which proves to be defective in material or workmanship within five years from the
date of manufacture by Grote will, at Grote's option, be repaired or replaced without charge upon return to Grote of the defective product, provided any defect in the product is brought to the attention of Grote within the warranty period, who alone will
be authorized to furnish or arrange for repairs or replacements within the terms of this limited warranty.
The above limited warranty does not apply, and no warranty, either expressed or implied, shall be applicable (a) to damage resulting from accident, alteration, misuse or abuse; (b) if the product is not installed, operated and maintained according to
procedures recommended by Grote; (c) if the serial number, date code, or other identifying marks affixed to the product by Grote are removed, obliterated or defaced. In no case shall the warranty be extended to defects in materials, components
(which includes but not limited to bulbs), or services furnished by third parties nor to the installation of the product performed by third parties, except those performed by or on behalf of Grote authorized distributors. If any repairs are made, or any other
parts are replaced during the warranty period, by any distributor other than a Grote distributor, in accordance with service manuals, parts, accessories, or attachments other than authorized by Grote for use in Grote's products, the purchaser shall pay
for such repairs or parts without recourse against Grote, and Grote shall be relieved of responsibility for fulfillment of the warranty with respect to parts or components of all repairs, alterations, or replacements so made.
In consideration of the express warranty and other terms herein contained, the purchaser agrees that purchaser's exclusive remedy and Grote's sole liability on any claim, whether in tort, contract or warranty, shall be limited to, at Grote's option, repair
or replacement of a defective product. No other remedy (including but not limited to incidental or consequential damages for the lost profits, lost sales, injury to person or property: or any other incidental loss or damages) shall be available to purchaser.
In no event, and for no cause whatsoever, including any breach or default by Grote, shall Grote have any monetary liability to purchaser in excess of the price paid by purchaser for the product in question.
This limited warranty is expressly in lieu of all other expressed or implied warranties, including the implied warranty of merchantability and the implied warranty of fitness for a particular purpose, and of all other obligations or liabilities on the part of
Grote. No dealer, distributor or other representative of the company is authorized to change this warranty in any way or to grant any other warranty.
Any affirmation of fact or promise made by Grote shall not be deemed to create an expressed warranty that the products shall conform to the affirmation or promise. Any description of the product is for the sole purpose of identifying such product and
shall not be deemed to create an express warranty that the product shall conform to the description. Any sample or product model is for illustrative purposes only and shall not be deemed to create an express warranty that the whole of the products
shall conform to the sample or model. Further, no affirmation or promise, or description, sample or model shall be deemed a part of the basis of the bargain between Grote and the purchaser.
Grote assumes no responsibility that title conveyed to the purchaser is good or the transfer of title to the products is rightful, or that the products shall be delivered free from any security interest or other lien or encumbrance of any third party, or free
from any rightful claim of any third party by way of infringement or otherwise.
NON-TRANSFERABLE
This warranty shall extend only to the original purchaser and is non-transferable.
END USER RESPONSIBILITY:
Each user bears full responsibility for making their own determination as to the suitability of Grote materials, products, recommendations, or advice for their own particular use. Each user is ultimately responsible to identify and perform tests and
analyses necessary to assure that its finished parts incorporating Grote products will be safe and suitable for use under end-user conditions. Nothing in this or any other document, nor any oral recommendation or advice, shall be deemed to alter, vary,
supersede, or waive any provision of this Limited Warranty or this Disclaimer, unless any such modification is specifically agreed to in writing signed by a Grote Industries Representative.
WARRANTY RETURN AND REPLACEMENT INSTRUCTIONS
To be eligible for limited warranty consideration, either contact your Grote sales representative or call Grote customer service at 800.628.0809 (In Canada call 800.268.5612). Upon issuance of a returned goods authorization number, return the failed
product, freight prepaid to: Warranty at Grote Industries, Inc., 2600 Lanier Drive, Madison, Indiana 47250. In Canada, return product, freight prepaid to: Warranty at Grote Industries Co., 230 Travail Road, Markham, Ontario L3S 3J1. Any product
covered under the terms of the respective limited warranty will be replaced directly to the original consumer / purchaser only. Items received by Grote will not be returned unless accompanied by a specific written request. The product to be returned will
be those items not covered under the warranty and will be returned to sender freight collect.
CONSUMER RIGHTS IN VARIOUS STATES
This warranty gives you specific legal rights, and you may have other rights that vary from state to state. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Further, some states do
not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you.
United States: 2600 Lanier Drive ● Madison, Indiana 47250 ● Phone: 800-628-0809 / 812-273-1296 ● Fax: 812-265-8440
Canada: 230 Travail Road ● Markham, Ontario L3S 3J1 ● Phone: 800-268-5612 / 905-209-9744 ● Fax: 800-267-9024
Electrical Connections and Programming
WHITE: Synch - Connect to the white wires from up to 10
RED: Power - Connect to +12/24VDC
GREEN: Pattern Select - Touch & Release to Ground.
BLACK: Ground - Connect to the negative terminal
This light can be connected for two different modes/applications:
Steady Burn with Slow Bursts (Off Flashing)
Dummy head to be connected to external flasher
other
lights AFTER setting the pattern.
Cut short and cap off if not used.
through your switch and a 5A fuse.
of the battery or a good chassis ground.
-2-
5A
FUSE
9-32VDC
BATTERY

Publicité

loading