Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
Install knob-style handle
Slide the handle onto the frame then secure
it with the included knobs and bolts.
Pump breather vent
The high-pressure pump may have a breather vent that will need your attention before
using the washer for the first time. Please see below for the style you may have.
RED shipping cap
1. Using a bladed screw driver, remove
the RED shipping plug from the top
of the pump.
2. Hand thread the BLACK breather
cap into the pump.
3. Snug the cap with your fingers.
7
(if applicable)
OR
RED shipping plug
1. Grasp the label and remove both it
and the RED shipping plug.
2. The breather is now open properly.
Publicité
