Publicité
Les langues disponibles
Les langues disponibles
Pump Maintenance
Note: The pump was filled with oil at the factory. For replacement, a premium pump oil or an
SAE 15W-40 oil is to be used. Change the oil after the first 50 hours of operation and every
100 hours thereafter or every 3 months.
1.
Oil sight glass
2.
Oil fill plug / vent cap
3.
Oil drain plug (not shown)
How to change the pump oil
1. Loosen the pump oil fill plug / vent cap.
2. Place a container under the oil drain plug.
3. Remove the oil drain plug.
4. After the oil has drained, insert the oil drain plug; tighten securely.
5. Refill with a premium pump oil or an SAE 15W-40 oil.
6. Make sure the oil level meets but does not exceed the dot in the center of the sightglass.
7. Insert the oil fill plug; tighten securely.
28
2
3
1
Publicité
