Pfannenberg PWS 6102 Serie Manuel D'utilisation page 42

GB
3.4.1 General assembly requirements
The following general requirements must be ensured for safe and reliable operation of the air/water heat
exchangers:
• The place where the switch cabinet is to be set up must be selected so as to guarantee adequate ventilation of
the air/water heat exchanger. A minimum clearance of 200 mm between units and from the nearest wall must
be observed.
• Installed components in the switch cabinet must not impede air circulation.
• Secure the switch cabinet against tipping.
• Ensure that provided hinges can support the additional weight with the air/water heat exchangers.
• Assembly of the air/water heat exchanger can take place with and without an external unit cover.
 Following assembly (without unit cover), attach the line/ protective grounding, connection line/display unit and
assemble everything together on the unit.
• Protect the installation location from heavy contamination with covers.
Operating manual PWS and PWI 6102 785408472 © Pfannenberg GmbH Page 11 / 31