Technical Characteristics; Dimensions - Simu 220/12 Guide D'installation

SIMUBOX 220/12 (three-phase)
SIMUBOX 300/12 (three-phase)
SIMUBOX 430/08 (three-phase)
SIMU S.A.S. au capital de 5 000 000 € - Z.I. Les Giranaux - BP71 - 70103 ARC-LÈS-GRAY CEDEX - FRANCE - RCS VESOUL B 425 650 090 - SIRET 425 650 090 00011 - n° T.V.A CEE FR 87 425 650 090
This manual applies to all three-phase SIMUBOX without integrated electronics regardless of the torque/speed
versions. Mandatory instructions to be followed by the motor and building automation professional installing the
motor.
SCOPE
Three-phase SIMUBOX motor is intended to activate curtains or grilles for commercial and industrial premises.
For information on the compatibility of the motor with the product to be powered and the accessories, contact the
manufacturer of the product to be powered or SIMU.
LIABILITY
Read this installation and user manual carefully before installing and using the three-phase SIMUBOX motor.
In addition to the instructions described in this manual, you must also follow the instructions detailed in the attached
document "ICC Safety Instructions".
Any use of three-phase SIMUBOX motors outside the scope of application described above is prohibited. This
releases SIMU from all liability and warranty obligations, as does failure to comply with the instructions in the manual
as well as instructions in "ICC Safety Instructions".
The installer must inform their customers of the conditions for using and maintaining the three-phase SIMUBOX
motor and must provide them with the use and maintenance instructions as well as the "ICC Safety Instructions",
after installing the three-phase SIMUBOX motor. All operations on the three-phase SIMUBOX motor, including After
Sale Service, require the intervention of a motor and building automation professional. If you have any doubt while
installing the three-phase SIMUBOX motor or if you require any additional information, get in touch with a SIMU
contact or visit the website www.simu.com.
COMPATIBILITY
Three-phase SIMUBOX motors have been made to be exclusively controlled by SD510 SIMU.
1

TECHNICAL CHARACTERISTICS

1.1 - Dimensions

1/5
EN
Ø 30
5141059C
EN - TRANSLATION OF THE
ORIGINAL MANUAL
S1
S2