Vimar ELVOX SLAVE EKKO ART 200D EAM6.N Manuel Pour Le Raccordement Et L'emploi page 11

EKKO ART
FIXING THE OPERATOR TO THE PILLAR (D)
In order to carry out a proper installation of the operator, it is necessary to comply with the geometry measurement shown in the tables in Pic. 6 and 8.
X
D
ASSEMBLING DRIVE ARM WITH THE ANTI-
THEFT LOCKING DEVICE (E)
Assemble the arms as shown in Pic. 5.
Caution: Once the screws V and W have been thoroughly
tightened (Pic. 5) unscrew them for half a turn, in order to
guarantee a free movement of the arm.
After assembling the arm, unlock the motor and fix the arm
to the motor with the supplied screw and M10 washer.
With the gate in closing position and the motor at rest, the
anti-theft lock (E) keeps the gate leaves securely closed
and prevents anybody from forcing the gate leaves open.
FIXING THE DRIVE ARM WITH THE ANTI-THEFT LOCKING DEVICE (E)
Unlock the operator.
Caution: start the operation with the gate in closing position. Straighten the levers until the anti-theft lock (E Pic. 5) is engaged and stressed. Move the
levers back a little bit just enough to avoid keeping the anti-theft locking in working position (stressed) every time the gate will close.
α°
A max A max*
90 140 190
90 200 200
90 205 205
90 225 225
90 - 240
95 0 0
100 0 0
105 0 0
110 0 0
A max * - When using only one opening stop (Fig. 8)
EN
13
X
B I T sec
60 130 300 20
70 140 270 19
18
80 150 230
90 160 135 16
15
110 180 0
70 140 284 18
19
90 160 302
110 180 315 19
19
155 225 322
E
B
X
A
α
I
V
W
4
5
6
9